UPOII-3000-96-EL

UPOII-3000-96-EL
UPOII-3000-96-EL
UPOII-3000-96-EL

Model: UPOII-3000-96-EL
Advantages of the model:
Double conversion
Protection against overheating
The correct form of a sine wave
Forced cooling
Use of new solutions in the circuitry and new components to improve the power characteristics
Extended battery life
Visual display of information on the LCD display

 
User Guide for the line-interactive uninterruptible power supply RUCELF (series UPI)

UPS Model UPOII-3000-96-EL
Maximum capacity Full VA 3000
Active, W 2400
Input parameters
Nominal input voltage, V 220
Input voltage range without switching to battery, in 115-300
at least 50% load, 5 115 ± 5 300 ± 5 …
under a load of more than 50% but less than 75% 6 140 ± 5 300 ± 6 …
under a load of more than 75% but less than 75% 7 160 ± 5 300 ± 7 …
under a load of 90% 8 185 ± 5 300 ± 8 …
The transition to battery power, ms 0
Tolerances of the input voltage frequency, Hz 40 – 60
Input circuit protection automatic safety
Output parameters
Static accuracy of the output voltage when the load changes within 100% 220 V ± 2%
Output Waveform sinusoidal
Coefficient of output voltage harmonic distortion (CI),% linear load 3
nonlinear
load
7
Allowable load current crest factor (crest factor) 3/1
System-wide parameters
Inverter overload capacity 100% -105% long without going
105% -125% 60
125% -150% 30
more than 150% 300ms
Dimensions (WxHxD) mm 190h330h425
Cold start mode there is
Storage batteries
Battery Type sealed, maintenance-free, lead-acid 12
Number of batteries, pieces 8
Battery voltage, V 96
Battery charging time 65 Ah from 20% to 90% of rated capacity, hour 9
Battery protection against deep discharge
LED information% discharge Yes
Sound information on the state of discharge Yes
Automatic shutdown at a voltage of 1.7 V / barley. Yes
Operating conditions
Operating temperature 0 … +40 ° C
Storage temperature -15 … +45 ° C
Indicators and communication
Display LCD display modes UPS
Communication RS-232 interface
Load connection European wall socket / terminal block
Alarms (light and sound) Overload, a fault, high temperature, an unacceptable deviation of network parameters, invalid battery discharge
Software PO “UPS Monitor” to monitor, control, monitoring of UPS and line
Рубрика:
Comments(0)